86-87 NQ50 NQ50D NQ 50 Special Spree Nifty 50 Eve 11t starter motor *Core Charge

Description

Location:
Bead Blaster Bin / T
11 Tooth NQ50 SPREE Starter Motor
31210-GK8-781
31210-GK8-782
Condition:
It has been rebuilt. Here is what was done on this one, and in general.
1. I took this starter apart and found that it was actually in really good shape
2. Generally I replace the Brushes, but these were in great shape.
3. I lightly washed the outside of all the pieces & the inside of the ones that were safe to do so.
4. The bearing was stuck and when loosened up felt rough. I pulled it & replaced it with a new bearing
5. The armature had carbon deposits on the contact surface, so i:
a. turned the armature so that it was true,
b. cleaned out between each plate on the armature so there was no shorts.
6. I lubricated the bushing that the armature rides in after cleaning all the dried up oil & grease out.
7. I put back together & tested for torque and power
8. I marked the starter so that if it was opened up, it voids the warranty. we have had thefts of internal parts. sad, right?
This starter is warrantied to work for you for 6 months.  It should in all reality last another 30 years pretty easily.
*
core charge info
*
There is a core charge of that i will refund upon the return of your non-working starter motor. In order to qualify for a full core refund, your starter motor must have these three main parts.
1. The body.
2. The Front face that has the part where you put the power wire onto.
3. The armature. this is the item that you can see outside the starter motor that has the splines.
The starter motor does not have to work. It just has to have all these parts.
If one or more of these parts are ruined and cannot be used at all, i will contact you and we can discuss it, its rare that any part is ruined unless they have been opened up by someone who doesn't
know what they are doing.
Return shipping for your core:
I will provide a prepaid label, upon request, to send the motor back to me free of charge.(in the usa) Just stick the motor in the package, slap the shipping label on and drop off at the post office.
Want to make sure this part fits before you order it?
We will help you confirm fitment and compatibility! Send us a message with your V.I.N. number (usually stamped into the frame), and we will look up your machine to make sure you get the correct parts!
This Item Will Fit The Following Models:
1986 NQ50 A SPREE
1987
NQ50 A SPREE
1986
NQ50 AA SPREE
1987
NQ50 AA SPREE
1986
NQ50D A SPREE
1986
NQ50D AA SPREE SPECIAL
*if you have 10 Teeth on your motor see the 84-85 NQ50 Spree motor i carry, or message me.
OEM Part Number:
31210-GK8-781
31210-GK8-782